Support Forum

Share your projects and post your questions

Register   or   Sign In
The Forum

IO Pi Plus behavior during boot?

2027 Views - Created 25/03/2017

25/03/2017

Posted by:
areslagae

areslagae Avatar

Hi,I am considering using a Raspberry Pi and several IO Pi Plus boards in a home automation system. The IO Pi Plus would greatly enhance the number of available outputs and inputs.However, since the IO Pi Plus board would permanently have electrically appliances connected to it (through opto isolators and 24V relays) I am wondering about the behavior of the IO Pi Plus during boot and startup of the Raspberry Pi and during configuration of the IO Pi Plus.Can onyone shed some light on this?Best regards,Ares Lagae

25/03/2017

Posted by:
andrew

andrew Avatar

Location:
United Kingdom

andrew Twitter  andrew Website  

The I/O pins on the IO Pi Plus default to an input state when the board is powered up so any optoisolators connected to the board would be switched off until the board is initialised.When using our python libraries and the other supported languages the boards are initialised with the pins as inputs with pullup resistors disabled.

Sign in to post your reply

Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view, download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.