Analog Devices TMP36 Temperature Sensor

£0.98 each (including VAT: £1.18)

Applications

  • Environmental control systems
  • Thermal protection
  • Industrial process control
  • Fire alarms
  • Power system monitors
  • CPU thermal management

 

Introduction:

The TMP36GT9Z is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius (centigrade) temperature. The TMP36GT9Z do not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range.

The low output impedance of the TMP36GT9Z and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs. All three devices are intended for single-supply operation from 2.7 V to 5.5 V maximum. The supply current runs well below 50 μA, providing very low self-heating—less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5 μA.

The TMP36GT9Z is specified from −40°C to +125°C, provides a 750 mV output at 25°C, and operates to 125°C from a single 2.7 V supply.

Datasheets

TMP36 Datasheet

Ratings & Specifications

  • Low Voltage Operation (+2.7 V to +5.5 V)
  • Calibrated Directly in °C
  • 10 mV/8°C Scale Factor (20 mV/8°C on TMP37)
  • ±2°C Accuracy Over Temperature (typ)
  • ±0.5°C Linearity (typ)
  • Stable with Large Capacitive Loads
  • Specified -40 °C to +125 °C, Operation to +150 °C
  • Less than 50 µA Quiescent Current
  • Shutdown Current 0.5 µA max

Important Information

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by abelectronics.co.uk to be a finished end-product fit for general consumer use. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. Persons handling the product(s) must have electronics training and observe good engineering practice standards. This development board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives.

Shop

Support

Click to contact us.
X

Have any Questions?

Send us any questions about this page or product and we will reply within 24 hours.

Submit your Message

X

Have any Questions?

Thank you for contacting us.

We will respond to your enquiry in the next 24 hours.

You can find answers to many questions and additional product support in our Knowledge Base and the Community Forum.