Raspberry Pi Plus Breakout Kit

£3.29 each (including VAT: £3.95)

Add a GPIO 40 Way Ribbon Cable
for only £2.99 each ex vat
Order  Suitable for the Raspberry Pi B+ GPIO port

The Raspberry Pi Plus Breakout is an easy to assemble breakout board to use with the Raspberry Pi.

The Raspberry Pi Plus Breakout kit allows you to easily connect your Raspberry Pi to breadboards for prototyping or the board can be configured with the supplied 40 pin IDC socket to connect directly onto the Raspberry Pi GPIO pins to give you easy access to the inputs and outputs with each one labelled on the board.  The board can be securely fitted to the Raspberry Pi using two mounting kits, sold separately.

The kit comprises of the following items:

1 x Raspberry Pi Plus Breakout PCB

1 x 40 pin IDC socket

4 x 20 way header pins (2.54mm spacing)

The Raspberry Pi, mounting kits and breadboard shown in the photos are not included in the kit.

Specifications for this product SpecificationsCompatibility for this product Compatibility

Product Code: bplusbreakout

EAN: 7426787870231


Knowledge Base Articles

Raspberry Pi GPIO Pin Usage


Specifications

Mechanical Drawings

Mechanical Drawing

Click image to enlarge


Compatibility

Model Status
Raspberry Pi Model A No
Raspberry Pi Model B No
Raspberry Pi 1 Model A+ Yes
Raspberry Pi 1 Model B+ Yes
Raspberry Pi 2 Model B Yes
Raspberry Pi 3 Model B Yes
Raspberry Pi Zero Yes
Raspberry Pi Zero W Yes
Orange Pi Yes
Asus Tinker Board Yes
Odroid Yes

Related Items

Important Information

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by abelectronics.co.uk to be a finished end-product fit for general consumer use. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. Persons handling the product(s) must have electronics training and observe good engineering practice standards. This development board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives. Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view, download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.