Raspberry Pi Plus Adapter Kit

£2.99 each (including VAT: £3.59)

Add a Mounting Kit Four Pack
for only £3.49 each ex vat
Order  Mounting kit to use on our Raspberry Pi + and 2 boards
Add a Mounting Kit
for only £1.29 each ex vat
Order  Mounting kit to use on our Raspberry Pi boards

The Raspberry Pi + adapter board allows you to connect expansion boards designed for the original Raspberry Pi models A and B onto your new Raspberry Pi A+, Raspberry Pi B+, Raspberry Pi 2 and Raspberry Pi 3.  The adapter board includes mounting holes for both the Raspberry Pi and the expansion board allowing you to securely fit your expansion boards onto the Raspberry Pi. 

Mounting kits are sold separately and can be purchased singularly or in packs of four.

Specifications for this product SpecificationsAssembly instructions for this product AssemblyCompatibility for this product Compatibility

Product Code: adapterplus

EAN: 7426787870279



Specifications

Mechanical Drawings

Mechanical Drawing

Click image to enlarge


Assembly

The kit contains the adapter PCB, a 40 pin female connector and a 26 pin male connector.  The connectors are supplied unsoldered and assembly will be required using a soldering iron and solder.


Compatibility

Model Status
Raspberry Pi Model A No
Raspberry Pi Model B No
Raspberry Pi 1 Model A+ Yes
Raspberry Pi 1 Model B+ Yes
Raspberry Pi 2 Model B Yes
Raspberry Pi 3 Model B Yes
Raspberry Pi Zero Yes
Raspberry Pi Zero W Yes
Orange Pi Yes
Asus Tinker Board Yes
Odroid Yes

Important Information

This development board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by abelectronics.co.uk to be a finished end-product fit for general consumer use. As such, the goods being provided are not intended to be complete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety and environmental measures typically found in end products that incorporate such semiconductor components or circuit boards. Persons handling the product(s) must have electronics training and observe good engineering practice standards. This development board/kit does not fall within the scope of the European Union directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these directives or other related directives. Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view, download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.