Legal Removal Request

Post: Me and my group are using the ADC Pi board for a group project in University. We're basically using the board to read battery voltage levels with the Raspberry Pi. We installed all the libraries needed and got were successful in reading and logging the voltage. I doubt this is relevant but I will add that we are using Apache and PHP to read the voltage log file and display it on a PHP website. (Local for now) Everything was working fine till a couple of days later we try to read the voltage again and an error appeared. There were no changes made whatsoever to the Pi, any software or hardware in the meantime when it stopped working. Below is the error pops up: Here is a picture of the error that is getting throwed up whenever we try to run demo-readvoltage.py or demo-logvoltage.py. For the sake of clarity I will copy the error code. Traceback (most recent call last): File "demo-readvoltage.py", line 28, in <module> adc = ADCPi (bus, 0x68, 0x69, 12) File "/home/pi/ADCPiABElectronics_Python_Libraries/ADCPi/ABE_ADCPi.py", line 106, in __init__ self.set_bit_rate(rate) File "/home/pi/ADCPiABElectronics_Python_Libraries/ADCPi/ABE_ADCPi.py", line 262, in set_bit_rate self._bus.write_byte(self.__address2, self.__config2) IOError: [Errno 5] Input/output error We have also noticed that when "i2cdetect -y 1" is called only the 0x68 address of the board is displayed, but the 0x69 address is absent. Below is a picture of our i2cdetect: Any help with this issue would be extremely appreciated as the project is nearing its due date and this error just appeared suddenly out of the blue, which could possible jeopardize the whole project for us.