The table below shows the various bit rates and the resolution in millivolts which our ADC boards can sample.
The ADC Pi, ADC Pi Plus and ADC Pi Zero can sample at 17bit, 15bit, 13bit and 11bit modes.
The ADC Differential Pi and Delta Sigma Pi can sample in 18bit, 16bit, 14bit...
We sell a range of analogue to digital expansion boards for the Raspberry Pi which can also be used on other platforms such as Arduino.
This guide is to help you choose the best ADC board for your application.
When selecting an ADC you need to consider the characteristics of the ADC for your...
We are often asked which cases are available to use with the Raspberry Pi and our expansion boards.
Over the past four years we have purchased many different cases and designs to test with our boards and the only case we have found which will fully enclose the Raspberry Pi and up to two of our...
For customers who require the country of origin, all of our Raspberry Pi expansion boards are designed and manufactured in the United Kingdom.
For customers requiring the custom HS code, our products are sent using the following customs code:
Circuit Boards: 8542 31 90 (Electronic integrated...
The list below shows the compatibility between our Raspberry Pi expansion boards and the various Raspberry Pi models which have been released.
Model 2 B
Model 3 B
1 Wire Pi...
Our Raspberry Pi Expansion boards use either the I2C pins, UART or SPI pins on the Raspberry Pi 's GPIO header.
All of the other GPIO pins are available to use via the stacking header connector.
I2C Pin Usage
The following expansion boards use the I2C GPIO pins:
1 Wire Pi...
AB Electronics UK provide a range of electronic products that meet environmental regulations, including REACH (Registration, Authorization and Restriction of Chemicals, European Union Regulation (EC) 1907/2006) and EU Directive 2002/95/EC and subsequent amendments of the European...