RJ12 pinout
The 1 Wire Pi Plus and 1 Wire Pi Zero are a 1 Wire interface for the Raspberry Pi
02/04/2023
Posted by:
joet
I want to connect a DS18B20 to the RJ12 port on the 1 Wire Pi Plus. What is the pin-out of the rj jack?
Thanks.
Thanks.
02/04/2023
Posted by:
admin
The pinout connections for the RJ12 port are shown below:
Pin - Usage
1 - 5V
2 - Ground
3 - OW (1-Wire® Data, ESD Protected)
4 - RT (1-Wire® Return/Ground, ESD Protected)
5 - NC
6 - NC
Pin - Usage
1 - 5V
2 - Ground
3 - OW (1-Wire® Data, ESD Protected)
4 - RT (1-Wire® Return/Ground, ESD Protected)
5 - NC
6 - NC
Forum Notice – Closure to New Posts
As part of our compliance with the UK’s Online Safety Act, the AB Electronics UK support forum is now closed to new posts and replies.
We understand the importance of continued support for our products, so if you have a technical query or require assistance, please use the Contact Form or consult our Knowledge Base for helpful articles and documentation.
We appreciate your understanding and continued support.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.
