RJ12 Socket
The 1 Wire Pi Plus and 1 Wire Pi Zero are a 1 Wire interface for the Raspberry Pi
10/06/2018
Posted by:
Big Gaz
Can anyone tell me the manuafcator and part code for the RJ12 socket fitted to 1-Wire Pi board. I would like to add the second connector and can't see one on the shop page.
I know i'm being a bit picky LOL, but i would like to buy one that matchs the connector already fitted.
Regards
Garry
10/06/2018
Posted by:
andrew
The RJ12 connector we use is made by Amphenol ICC and the part number is 54601-906WPLF.
They are available from most of the major component suppliers.
10/06/2018
Posted by:
Big Gaz
Forum Notice – Closure to New Posts
As part of our compliance with the UK’s Online Safety Act, the AB Electronics UK support forum is now closed to new posts and replies.
We understand the importance of continued support for our products, so if you have a technical query or require assistance, please use the Contact Form or consult our Knowledge Base for helpful articles and documentation.
We appreciate your understanding and continued support.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.
