Is mounting kit compatible with Raspberry Pi's Touch Display?
The ADC Pi is an Analogue to Digital converter for the Raspberry Pi
22/05/2016
Posted by:
minnytonkas
In other words can I stack the mounting kit on top of a Raspberry Pi mounted on a official Raspberry Pi 7" Touch Display?The screws provided to attach Pi to the spacers on the display are M2.5 with a lenght about 5.8 mm..
23/05/2016
Posted by:
andrew
The thread on the end of the mounting kit is M2.5 and about 5.8mm long so it should screw into the spacers on the touch display.
Forum Notice – Closure to New Posts
As part of our compliance with the UK’s Online Safety Act, the AB Electronics UK support forum is now closed to new posts and replies.
We understand the importance of continued support for our products, so if you have a technical query or require assistance, please use the Contact Form or consult our Knowledge Base for helpful articles and documentation.
We appreciate your understanding and continued support.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.
