Share your projects and post your questions
OSError : [Errno 121] Remote I/O error
IO Pi Plus interrupt-driven input
w1_master_driver w1_bus_master1: Family 0 for 00.700000000000.f8 is not registered.
I2C pullup resistors
168 Views - Created 42 days ago
42 days ago
Posted by:Motrac Matthew
I am relatively new to RPi devices but I'm aiming to add analogue voltage measurements to my RPi 4 model B. I read (https://www.abelectronics.co.uk/p/69/adc-pi-raspberry-pi-analogue-to-digital-converter) that the ADC Pi is compatible with the RPi 4 but it does not mention the model 4b. Is this the same? And is the ADC Pi compatible with the b? Just wanted to double check before I purchase.
The ADC Pi is compatible with the 4B model. It can be used with any Raspberry Pi model that has a 40 pin GPIO header.
Quote from andrew
Hi Matthew The ADC Pi is compatible with the 4B model. It can be used with any Raspberry Pi model that has a 40 pin GPIO header.
Thanks for the response Andrew! I will make an order soon.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view, download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.