GPIO2 & GPIO3
The IO Pi Plus is a 32 channel MCP23017 GPIO expander for the Raspberry Pi
31/10/2017
Posted by:
beezer38
IO Pi Plus prevents GPIO2 and GPIO3 from being used for input/output because these pins connect to the i2c level converter. How can I regain input/output control and disable the i2c on these pins? Will the IO Pi Plus board still work?
31/10/2017
Posted by:
andrew
The I2C pins on GPIO2 and GPIO3 are used by the IO Pi Plus for communication with the IO chips so it is not possible to use the pins as standard IO and use the IO Pi Plus at the same time.
Forum Notice – Closure to New Posts
As part of our compliance with the UK’s Online Safety Act, the AB Electronics UK support forum is now closed to new posts and replies.
We understand the importance of continued support for our products, so if you have a technical query or require assistance, please use the Contact Form or consult our Knowledge Base for helpful articles and documentation.
We appreciate your understanding and continued support.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.
