Operating Mode 1 Wire DS18b20
The 1 Wire Pi Plus and 1 Wire Pi Zero are a 1 Wire interface for the Raspberry Pi
14/08/2015
Posted by:
altiw001
First I use a Raspberry Pi 2.
I attached a 1-Wire temperature sensor ( DS18b20 ) to a 1-Wire - pi - plus board .
There are two betribsarten of DS18b20 : - Parasite Powered
- External Vdd Powered
how and where can I find out which mode I use ?
Mit freundlichen grüßen
14/08/2015
Posted by:
andrew
14/08/2015
Posted by:
altiw001
Forum Notice – Closure to New Posts
As part of our compliance with the UK’s Online Safety Act, the AB Electronics UK support forum is now closed to new posts and replies.
We understand the importance of continued support for our products, so if you have a technical query or require assistance, please use the Contact Form or consult our Knowledge Base for helpful articles and documentation.
We appreciate your understanding and continued support.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.
