IO Pi and IO Pi Plus Support (Page 5)
Support Forum for the IO Pi and IO Pi Plus
The IO Pi Plus from AB Electronics is a digital I/O expansion board designed for the Raspberry Pi. It features 32 digital input/output channels, which are controlled via the I²C bus. The board uses two MCP23017 16-bit I/O expanders, allowing for easy expansion of the Raspberry Pi’s GPIO capabilities.
The board is stackable, meaning multiple boards can be added to a single Raspberry Pi, providing up to 128 I/O ports.
BOM list of pcb
Posted in IO Pi and IO Pi Plus, last reply 09/02/2019
Replies: 2
CLI reading
Posted in IO Pi and IO Pi Plus, last reply 25/01/2019
Replies: 7
Pin 1A & Pin 1B
Posted in IO Pi and IO Pi Plus, last reply 20/01/2019
Replies: 2
DXF Files
Posted in IO Pi and IO Pi Plus, last reply 08/01/2019
Replies: 3
Reccomended Header for IO Pi Plus when Stacking Two Together with the Mounting Kit
Posted in IO Pi and IO Pi Plus, last reply 22/11/2018
Replies: 1
IOPi.py line 156: model = re.match('(.*?)\\s*\\s*(.*)', line)
Posted in IO Pi and IO Pi Plus, last reply 06/11/2018
Replies: 2
No Module found IOPi
Posted in IO Pi and IO Pi Plus, last reply 03/10/2018
Replies: 7
Asp.net core and Raspbian
Posted in IO Pi and IO Pi Plus, last reply 17/09/2018
Replies: 1
IO PI MCP23017 powered from 16ch relay board
Posted in IO Pi and IO Pi Plus, last reply 30/08/2018
Replies: 3
"Input/output error" When stacking two IO Pluses
Posted in IO Pi and IO Pi Plus, last reply 25/07/2018
Replies: 2
Troubleshooting large array of HATs
Posted in IO Pi and IO Pi Plus, last reply 24/07/2018
Replies: 3
IO Pi Plus and GPIO Interrupt
Posted in IO Pi and IO Pi Plus, last reply 06/07/2018
Replies: 15