IO Pi and IO Pi Plus Support (Page 3)
Support Forum for the IO Pi and IO Pi Plus
The IO Pi Plus from AB Electronics is a digital I/O expansion board designed for the Raspberry Pi. It features 32 digital input/output channels, which are controlled via the I²C bus. The board uses two MCP23017 16-bit I/O expanders, allowing for easy expansion of the Raspberry Pi’s GPIO capabilities.
The board is stackable, meaning multiple boards can be added to a single Raspberry Pi, providing up to 128 I/O ports.
NodeJS with website
Posted in IO Pi and IO Pi Plus, last reply 17/09/2020
Replies: 1
IO PI Plus stops working after home assistant error
Posted in IO Pi and IO Pi Plus, last reply 18/06/2020
Replies: 3
get_ functions in Python Libraries?
Posted in IO Pi and IO Pi Plus, last reply 17/06/2020
Replies: 2
Right angle connectors
Posted in IO Pi and IO Pi Plus, last reply 06/06/2020
Replies: 1
Can multiple cards use the same GPIO pin for interrupts
Posted in IO Pi and IO Pi Plus, last reply 20/05/2020
Replies: 5
C# for raspbian
Posted in IO Pi and IO Pi Plus, last reply 19/05/2020
Replies: 1
Neopixel LEDs and IO Pi expansion board
Posted in IO Pi and IO Pi Plus, last reply 14/05/2020
Replies: 3
Interrupts in C
Posted in IO Pi and IO Pi Plus, last reply 27/03/2020
Replies: 4
error [121] remote I/O error.
Posted in IO Pi and IO Pi Plus, last reply 24/03/2020
Replies: 6
I2C bus works only with direc start in development area/ but not when compiled programm is started by PHPskript
Posted in IO Pi and IO Pi Plus, last reply 22/02/2020
Replies: 2
Using the IO Pi Plus pins as inputs
Posted in IO Pi and IO Pi Plus, last reply 19/02/2020
Replies: 18
IOCON Bit 2 (ODR)
Posted in IO Pi and IO Pi Plus, last reply 04/02/2020
Replies: 2